THERMO POWER AUTOMOCION fondoAnticongelantes
Thermo POWER

THERMO POWER Plus, is a thermal carrying fluid that outperforms the other most widely used liquids such as water and anti-freeze mixtures, as well as other synthetic fluids, recording astonishingly good specifications.
Click here for more information

THERMO POWER Plus, does not have any inhibiting agents. Its qualities and dynamic behaviour ensure a much higher performance with no risk or fatigue for the materials that make up the circuit..

The addition of anti-freezes and other liquids significantly increases water’s viscosity, and this factor needs to be taken into account when calculating the loss of loads in the circuits and in the fluid’s flow speed, especially for cold starts.
THERMO POWER Plus, when used undiluted, and contrary to most thermal carrying fluids, THERMO POWER Plus is a lubricant, so it reduces friction and increases flow speed.
The thermal expansion coefficient of thermal carrying fluids is higher than that of water, which means the expansion effect produced needs to be calculated , with THERMO POWER Plus resolving this stability issue.

Most anti-freeze fluids degrade at temperatures of around 120°C and may generate substances that corrode the materials that make up the circuit. At these temperatures, THERMO POWER Plus remains stable, being non-degradable and non-corrosive.

The majority of the fluids raise the boiling point of water only slightly, whereas THERMO POWER Plus in undiluted form has a very high boiling point, which is very positively reflected in the performance.

THERMO POWER Plus, does not freeze even at -40°C. In areas that experience extreme weather conditions, it prevents any damage to circuits or installations. Using THERMO POWER Plus thermal carrying fluid optimises the performance of mechanical components and keeps circuits in perfect working order.

METHOD OF USE:
Before filling a circuit, it needs to be cleaned by flushing circulating water through to remove any waste. Then fill the circuit with THERMO POWER Plus, without adding any other liquid. THERMO POWER Plus is to be used in undiluted form.

- It does not freeze even at -40°C
- No rusting
- No scaling.
- Lubricant.
- High boiling point
- Use undiluted
- No dilation

5

Litres

5

Price

44.40€

25

Litres

25

Price

170.25€

Valid XHTML 1.0 Transitional

¡CSS Válido!

ASENSA ECOLOGI EUROPEAN FORMULA INTA VERIFIED

Copyright © - SOL POWER Plus – All Rights Reserved