Thermo Power Industrial outperforms the most widely used liquids such as water and anti-freeze mixtures, as well as other synthetic fluids, with no risk of increasing the pressure or fatigue on the circuit’s component materials.
The addition of anti-freezes and other liquids significantly increases water’s viscosity, and this factor needs to be taken into account when calculating the loss of loads in the circuits and in the fluid’s flow speed, especially for cold starts. When used undiluted, and contrary to most thermal carrying fluids, THERMO POWER Plus is a lubricant, so it reduces friction and increases flow speed. The thermal expansion coefficient of thermal carrying fluids is higher than that of water, which means the expansion effect produced needs to be calculated, with THERMO POWER Plus resolving this stability issue.
Most anti-freeze fluids degrade at temperatures of around 120°C and may generate substances that corrode the materials that make up the circuit. At these temperatures, THERMO POWER Plus remains stable, being non-degradable and non-corrosive.
THERMO POWER Plus, does not freeze even at -40°C. In areas that experience extreme weather conditions, it prevents any damage to circuits or installations. Using THERMO POWER Plus thermal carrying fluid optimises the performance of mechanical components and keeps circuits in a perfect working order.
MMETHOD OF USE:
Before filling a circuit, it needs to be cleaned by flushing circulating water through to remove any waste. Then fill the circuit with THERMO POWER Plus, without adding any other liquid. THERMO POWER Plus is to be used in undiluted form.